Waterproof silicone rubber for voltage transformer

Description of waterproof silicone rubber for voltage transformer
        Silicone encapsulants are supplied as two-part liquid component kits. When liquid
components are thoroughly mixed, the mixture cures to a flexible elastomer, which is well
suited for the protection of electrical and PCB system assembly applications.

        Silicone encapsulants cure without exotherm at a constant rate regardless of sectional thickness or degree of confinement.

        Silicone elastomers require no post cure and can be placed in service immediately following the completion of the cure schedule. Standard silicone encapsulants require a surface treatment with a primer in addition to good cleaning for adhesion while primerless silicone encapsulants require only good cleaning.



Characteristics of waterproof silicone rubber for voltage transformer
        Electronic potting silicone rubber is a kind of two component silicone elastomer, the mix ratio of addition cure silicone is 1:1, and 10:1 for condensation cure silicone with characteristics of heat-conducting, low viscosity, inherent flame resistance, waterproofing, etc. Electronic Potting Silicone Rubber can cure both at room temperature and heated temperature and the curing time can be accelerated by higher temperature.  


Application of waterproof silicone rubber for voltage transformer
1. General potting applications for electronic modules
2. Light industry, lamp, led, lcd and so on.
3. Electronic connectors
3. Sensors
4. Power supplies
5. electronic controls
6. Relays
7. Encapsulant for solar cells
8. High voltage resistor packs
9. Amplifiers
10. Transformers
11. Adhesive handling beam lead integrated circuits during processing