GRC Architecture Decoration Mold Silicone Rubber

GRC Architecture Decoration Mold Silicone Rubber Description:   GRC architecture decoration mold silicone rubber is a kind of specialized architecture decoration mold making silicone rubber,which is a kind of liquid bicomponent silicone,part A is liquid silicone,part B is curing agent.The silicone rubber will be cured elastomer after mixing part A and part B according to a certain proportion.Therefore,silicone mold is elastic,and it is suitable for delicate,intricate,and easy to be destroyed products mold making.   GRC Architecture Decoration Mold Silicone Rubber Application:   GRC architecture decoration mold silicone rubber is widely intended to replicated delicate pattern products and primarily used for European-style decorative components,plaster,cement,sculpture,buddhist statue,crafts mold making,such as plaster mold,plaster line,simulated animal and plant sculpture,furniture decoration,plaster decoration,resin crafts,poly crafts,unsaturated resin crafts,roman column,cement sculpture,human replica.   GRC Architecture Decoration Mold Silicone Rubber Features: 1.Good fluidity,moderate viscosity,can brush to save cost. 2.Low shrinkage,non-deformation. 3.High temperature resistance,Good tension,easy-demoulding. 4.Suitable for large European-style decorative components,cement,roman column,plaster sculpture crafts. 5.High duplication times,more durable,acid and alkali resistance.   Hong Ye Silicone Rubber---GRC Architecture Decoration Mold Silicone Rubber Datesheet:   Model HY-E640 Appearance liquid Hardness(shore A ) 40±2 Mixing ratio(%) 1:1 or 10:1 Viscosity(mPa.s) 12000±2000 Tensile strength(MPa) 6.2 Tear-strength(kN/m) 12±2 Elongation(%) 320 Shrinkage rate(%) 0.1 Operation time(mins) 20-40 Curing time(hrs 25℃) 3-5     GRC Architecture Decoration Mold Silicone Rubber Notes: 1.The amount of catalyst should depend on temperature,Higher temperature,less addition. When the curing agent is used too much, the mould will be hard and brittle. When the curing agent is used too little, the operation time will be prolonged 2.In order to use silicone mold the most effectively,please use it after checking at least 24 hours.