Pouring Molding Pourable Silicone Rubber

POURING MOLDING POURABLE SILICONE RUBBER DESRIPTION
        Pouring molding pourable silicone liquid is two-parts silicone, part A is flowable liquid silicon, part B is curing agent/ catalyst ,which gets cured at room temperature 25℃ within 3-6 hours or heating curing .This product is perfect for mold making,such as the terracotta arts, resin crafts, buddhist statue crafts, ceramic statues, consctruction decorations etc.


POURING MOLDING POURABLE SILICONE RUBBER APPLICTION
        HONG YE JIE provides two types of pourable silicone rubber, includes tin cure rtv2 silicone and plaitnum cure rtv2 silicone, they are suitable for replicating the arts and crafts, resin arts, polyurethane arts, culture relic , soap arts,ornamental plaster, garden sculptures, fiberglass animal,GRC perfectly due to its low viscosity, high tear and tensile strength. 

POURING MOLDING POURABLE SILICONE RUBBER FEATURES
1.High duplication times and no deformation

2. Excellenttear strength and tensile strength.

3.Good fluidity and good operability and good for both pouring method and pouring method.

4.Excellent flexibility and it’s easy to demould.

5. High temperature resistance.

6.All hardness from 20 to 40 shore A



POURING MOLDING POURABLE SILICONE RUBBER OPERATION
        Prepare the original mold：Weight silicone & curing agent according to the mix ratio recommended( tin silicone is 100:3, platinum silicone is 1:1 or 10:1), than remember to stir silicone & curing agent evenly, otherwise the silicone rubber will be partly solidified and bring problems in your final operation, then the finished molds will meet a short life which will cause a waste of silicon rubber.

Vacuum pumping:Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.


POURING CASTING NOTES
        For simple pattern products we suggest use pouring operation way, which will be very easy to operate and demould. Pourable silicone require light viscosity which will be easy to flow smoothly and easy to de-air .


POURING MOLDING POURABLE SILICONE RUBBER NOTES
1.The curing rate of this product is closely relevant to the temperature. The higher the temperature is, the greater the humidity is and the curing speed becomes faster.  

2.Users can choose the curing agent according to the weather condition, and adjust the amount of the curing agent in order to reach the appropriated curing rate. 

3.Normally, different silicone should be choosed according to different product's features,for example :

- For products size (20cm-80cm),  with intricate designs, 20-25 shore A is suitable.  with simple designs, 25-30 shore A is suitable.

- For products size (80cm-150cm),  with intricate designs, 25 shore A is suitable. with simple designs, 30-35 shore A is suitable.

- For products size (more than 150cm),  with intricate designs, 25-28 shore a A is suitable. with simple designs, 35-40 shore A is suitable. 



POURING MOLDING POURABLE SILICONE RUBBER SHELF LIFE
Twelve(12) months from date of shipment when stored under 25℃ in the original sealed packages at dry and cool places.  


POURING MOLDING POURABLE SILICONE RUBBER PACKAGE
1kg/jar, 5kgs/drum, 20kgs/drum, 25kgs/drum, 200kgs/drum and vacuumed packing is available.