Best Pad Printing Silicone Rubber for Alloy Toys

Main applications of pad printing silicone rubber for alloy toys: Pad printing silicone rubber is applicable to produce printing pads which is a carrier transferring the patterns from the steel plate onto the products' surface. Pad printing silicone rubber for alloy toys is also used for printing the irregular patterns on plastic toys, lighting, electroplating products, electronic toys, stationery, artwork gifts, and trademarks etc. This product is featured as good printing effects and high printing times, good quality, no particle, without any impurity, resistance the friction, and good resilience. It also has the advantage of low shrinkage, good tensile and tear strength, great fluidity and easy to operate. And different colors, like red, green, yellow, etc., are available according to the requirements of customers.   Our company provides the best pad printing silicone rubber for alloy toys. HY-901, HY-902, HY-912, HY-918 with the hardness of 25-28 shore A and HY-916 with the hardness of 18-20 are particularly suitable for making alloy toys molds.   Operating Instructions of pad printing silicone rubber for alloy toys: 1. Firstly, clean the mold with detergent, and dry it by a piece of cloth or an air gun and then coat the mold with a layer of release agent. 2. Generally, the ratio of pad printing silicon rubber and the silicon oil depends on the size of pattern which customer needs to print. The larger the pattern is, the softer the printing pad should be, and more silicon oil needs to add. Contrarily, if a silicon pad with high hardness needed, silicon oil should be added less or none. General hardness of the printing pad is 15A°~-25 shore A. 3. General mixing proportion is as follows: add 30g silicon oil into 100g silicon then hardness of 20A° printing pad we get, which is suitable for the pad printing for alloy car. 4. Relation between the amount of the curing agent added and the chemical reaction of the silicon is as follows: mix 100g silicon and 50g silicon oil sufficiently and evenly, then add the curing agent which is 2%-3% of the total weight of the silicon and the silicon oil, keep stirring for 2-3 minutes, and then de-air to remove the air bubbles.     Next, you also need to pay attention to some matters about the storage and transportation of the pad printing silicone rubber for alloy toys and the maintenance of printing machines. There are the following several aspects. Storage and transportation--- 1. The product should be stored in a cool dry place, avoid the sun and rain, it must be kept away from acids, alkalis, salts and other compounds. The shelf life is one year from the date of production. For some models, after three months, the viscosity will increase, which will be, generally speaking, no effect to its performance. It can be re-used through a re-examination even if over its storage period. Curing agent is easy to absorb moisture and get volatilized, so the deterioration should be sealed for storage. 2. The goods are NOT subject to IMDG except the curing agent.   Maintenance of printing machines--- 1. Because the printing machine is easy to change the printing point or press your hand, you must concentrate on the operation of the machine, and it is absolutely not allowed to talk with others or doze off, otherwise it is easy to cause some serious consequences. 2. As soon as you go to work every day, you should put the filter of the water in the tank first. 3. It is required for lubricating oil on the oiling port of the shelves every day. 4. You need to fill up the tank with oil in time. 5. The pneumatic of printing machine must be controlled at 3.0kg-5kg. 6. This placement of tool items must be strictly in accordance with relevant instructions. 7. You need use a rag to clean the product dropped on the floor at first, then this product can be placed in the bucket.   Hong Ye Jie Technology Co., Ltd. established in 1998, is global leading silicone rubber manufacturers. We supply the most suitable and superior silicone raw materials for alloy toys to meet your satisfaction, and we provide the free technical training on products usage and operation instructions and free customer service to solve technical issues. If you want to know more specific details about the pad printing silicone rubber for alloy toys and operations and maintenance of printing machine, you can get this information by sending an e-mail at info@szrl.net or tour our website:http://www.szrl.net, we will reply as soon as possible!