Operation Instruction of Making Silicone Mold with...

Step One:Deal with the original mold The surface of the original mold should be clean and smooth. If your products with thin flower patterns, and especially with porous substrates, you need to shoose a suitable release agent such as soap water, detergent, Vaseline or petroleum jelly.   Step Two:Mix the mold making silicone rubber and the curing agent Weight 100g Part A mold making silicone rubber base and 2 parts of Curing Agent in a clean container. Mix mold making silicone rubber base and the curing agent evenly. Hand or mechanical mixing can be used.   Step Three:Release the bubbles of the mold making silicone rubber It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mix to completely expand and then collapse. After a further 1-2 mins under vacuum, the mix should be inspected and can be used if free of air bubbles.   Step Four:Pouring The mold making silicone rubber onto the original mold Pour the mixture onto the original mold. It will cured within 6 hours (or faster by different mixing ratio or room temperature), we advice you de-mold after 24 hours, it is will improve the replicating times of mold making silicone rubber mold.