Condensation-type silicone rubber pad

Condensation-type silicone rubber pad appearance representing 0.1% of the water flowing liquid, with a high temperature, salinity, pulling elastic good, small viscosity, low bleaching, no shrinkage wear characteristics. You can make out the product without distortion, good flexibility, strength, and efficient simulation results.     　　      Condensation-type silicone pad use is mainly used for surface printing hardware and other products, can be at room temperature vulcanization molding. The amount of curing agent in the production process of condensation type printing adhesive curing time also played a considerable role, and the curing time is inversely proportional to the amount of curing agent. The following is a condensation-type silicone rubber pad product parameters: 　　Condensation-type silicone pad in the course, pay attention to the following matters: 　　First, the equipment before using the product to extend the use of (mold) clean, then water treatment equipment in a clean, clean the mold, then a layer of release agent after the surface evenly coated; followed in order to make products meet uniform overall effect will stir in condensed printing plastic bags or buckets inside 5-10 minutes. 　　Second, the used amount of silicone oil, and requirements for printing in general usage patterns of silicone oil area proportional relationship, that pattern area if the surface of the printed plastic hardware is relatively large, it increases silicone oil. But also, as the case may be. 　　Third, on the condensation-type silicone rubber pad storage problem, first of all, the product should be placed in sealed where no direct sunlight at room temperature should not exceed 25 degrees Celsius: Then place the place to dry, ventilated, clean, and avoid contact with water. Finally, the use of the process, pay attention to safety, be careful curing agent splashed into the eyes and skin contact; Should accidentally come into contact with the skin to use water to clean, if the contact area of the eye with water immediately deal with the same treatment, and consult a doctor. 　　Hong Ye Jie Technology Co.Ltd. professional Condensation-type silicone rubber pad，Electronics and hardware design silicone pad printing ，Down oil effect, the number of multi-pad  silicone pad,uch as silicone rubber products. Welcome customers and dealers to negotiate, free consulting experts :400 -779-4008, you can also send us an email info@szrl.net.