Hello, welcome to HUIZHOU HONGYEJIE TECHNOLOGY CO., LTD!
Language: 中文版 ∷  英文版
Your location: Home > News > Company News >

Company News

Small culture stone silicone mold making process

Natural culture stone culture stone and two artificial culture stone , with its original natural beauty attracts the world , meet the people respect for nature , return to nature the concept of culture , which is widely used for decorative stone wall , making the wall King , etc. ; then today we use culture to make a silicone mold stone culture stone we want.   Prepare the necessary tools to mold species ( small culture stone ) is fixed on a flat wood or glass , to clean the surface of the mold species on four wooden tiles or bricks around and then the formation of mold species and use Hot melt adhesive seal gaps. Thus , culture stone mold making silicone finished ready to begin the next step.   With a ruler on the inside of the painted brick around about 1cm high scale line , the height is the thickness of the silicone mold , and then planted on a uniform mold brushing a layer of release agent.   Weighing silicone, according to the product structure , complexity , size, culture stone mold silicone to select the model , which is produced using leaves HY-638 silica gel, 2% -5% of the proportion of curing agent and stir well pumping vacuum .   Vacuum pump should be noted that not too long, generally not more than 10 minutes , you can read the table to -0.1mpa , case no vacuum machine , you can reduce the proportion of curing agent to extend curing time , in order to drain more bubbles .   The first layer is poured into the silicone mold species in the first layer than the second layer, the thickness of silica gel , the silica gel with a smooth tool after gently on the surface covered with a layer of glass fiber mesh, wire mesh and then covered with fine side or glass fiber network to enhance hardness , tear of the silicone , making culture stone made ??out of silicone mold without distortion , good rally . Then use the tool gently smooth , then pour the second layer of silica gel ( to be evacuated ) . ( Note: If you put barbed wire , it is recommended to be cured after the first layer of silicone into the second layer of silica gel . )   After the silicone is fully cured ( 3-4 hours ) , removed the surrounding brick , stone silicone mold the culture removed , cut with scissors sides excess silicone . At this point , the whole process ends after 24 hours culture stone silicone mold can be put into production use.   Datas are from Shenzhen Hong Ye Jie Technology Co., Ltd., if you want forward, please indicate it. Hong Ye silicone, quality and quantity guarantee, we welcome new and old customers and dealers to discuss business, the company official website: http://www.szrl.net contact number :400-779-4008, you can also send us an email info@szrl.net.

Related news

CATEGORIES

WeChat qr code close
WeChat qr code